A cracked valve will be replaced during a full engine rebuild. Is anyone else ankle deep in car parts? Bob E.
10 comments:
Anonymous
said...
The new water pump and alternator are now installed and am about to install a voltmeter. I might install a new hi-torque starter I have but it's not a "must do". Dwight
My MGA trailer project is progressing at a fantastic speed now that I have a warm space to work and nothing in the shop. No reason other than laziness I should not have it paint ready in a few weeks. Anybody out there done their own automotive painting? Last car I painted was in university around 1979 and I did it with a brush and a can of house paint. turned out rather well I thought. Ralph
"Anybody out there done their own automotive painting?" Hey Joe!....you out there? Ralph needs us to paint his car. Could be fun...or a huge mess. Bob E.
I've got to pull the transmission to repair a leaky hydraulic throwout bearing and at the same time replace the tailshaft seal for the driveshaft slip yoke. There are also some electrical gremlins (thank you Lucas!) to chase down and the installation of an air/fuel ration gauge Ralph,I'm available help with your trailer......turning a wrench, block sanding, taping, prep etc. Would be interested in seeing it.
Wow another offer of generous help. Thanks Phil. I wish you guys lived closer I would have had this project finished earlier. like maybe 10 years ago when I started.
Ralph I will keep you all posted and when I get some more of the grunt out of the way I be a callin fer sure.
Hi there Fabacians, I would love to help out if we could do the deed on a Friday or Saturday. I can't imagine how much I could learn from Joe about painting and wet sanding. Just let us know when your ready Ralph!
10 comments:
The new water pump and alternator are now installed and am about to install a voltmeter. I might install a new hi-torque starter I have but it's not a "must do".
Dwight
My MGA trailer project is progressing at a fantastic speed now that I have a warm space to work and nothing in the shop. No reason other than laziness I should not have it paint ready in a few weeks. Anybody out there done their own automotive painting? Last car I painted was in university around 1979 and I did it with a brush and a can of house paint. turned out rather well I thought.
Ralph
"Anybody out there done their own automotive painting?"
Hey Joe!....you out there? Ralph needs us to paint his car. Could be fun...or a huge mess.
Bob E.
I'm here and I have all the gear....I'd be willing to have a go Ralph if you would accept an absolutly unguaranteed job. :-)
Hmm I may have to consider this absolutly unguaranteed job but only if it ia money back absolutly unguaranteed job.
Ralph
Sounds like a job for FABACTRS & PC!
(Cue the stirring music)
Just let us know Ralph.
Bob
Happy to lend a hand.
Dwight
I've got to pull the transmission to repair a leaky hydraulic throwout bearing and at the same time replace the tailshaft seal for the driveshaft slip yoke.
There are also some electrical gremlins (thank you Lucas!) to chase down and the installation of an air/fuel ration gauge
Ralph,I'm available help with your trailer......turning a wrench, block sanding, taping, prep etc. Would be interested in seeing it.
Phil
Wow another offer of generous help. Thanks Phil. I wish you guys lived closer I would have had this project finished earlier. like maybe 10 years ago when I started.
Ralph
I will keep you all posted and when I get some more of the grunt out of the way I be a callin fer sure.
Hi there Fabacians, I would love to help out if we could do the deed on a Friday or Saturday. I can't imagine how much I could learn from Joe about painting and wet sanding. Just let us know when your ready Ralph!
Terry
Post a Comment